TM VSR ONE Sniper | 1217 | Long

Richard from our tech team talks about and demonstrates a customer's upgraded TM VSR ONE Sniper build. Please find the full build description below. If you like our videos, then please like, subscribe, and comment. FPS Results (Hop Set / Range Tested 65m) 316 FPS (Measured On 0.43 gr BB) Tested At Range - 65m 0.43 ammo Recommended 0.43 Scope Of Work: Service / Upgrades Installed Action Army VSR-10 S-Trigger Set For TM VSR10 SKU: AA-B01-011 Laylax (PSS10) - 150SP Upgrade Spring For VSR-10 Bolt Action Rifle Series SKU: LL-PSS-4582109584613 Psionic R-Hop All-in Kit Gen2 VSR (NO9) (For Laylax PSS 6.03mm Barrel) SKU: PSI-PK-09-LLX-V2 Action Army Twisted Cylinder Kit For TM VSR10 SKU: AA-B01-037 Action Army Spring Guide (7mm) For TM VSR-10 SKU: AA-B01-003-9010109073158 Action Army Inner Barrel Spacer Set For VSR10 G Spec SKU: AA-B01-012 Sniper Bolt Action Service & Rebuild Fee SKU: E6-Labour-sniper Mapleleaf MLC hop unit v2 set. Shots Straight and Far, we hope you experience the same. Tested On Arm Service Interval we would recommend at 50K rounds, it is optional. Please remember if you use 11.1v its at your own risk on any build not tested here on 11.1v. All Parts installed by us are covered under warranty, we do not cover original TM parts on upgraded replicas. Please see our warranty information on the website. This RIF was put through our "4 point testing" prior to dispatch. Thank you for the opportunity to do this build for you. We always appreciate long-term feedback on our builds good or bad. If you are a trade shop looking to stock the parts we make we do offer shop discounts for those parts. We would love to see more shops selling our parts. www.eagle6.co.uk is the link to our webstore FPS testing All replicas are tested at range on the ammo customers would use in the game. The hop unit is set at a decent range, not over or under-hoping. We then take a reading on 0.20 ammo and on the ammo you use. We can measure other ammos on request. The customer has to agree to these FPS numbers prior to dispatch. It's also the most accurate and correct way to test. Testing as the customer will use it. Though we consider FPS testing on 0.20 to be an inaccurate way of measuring, we will provide figures measured on them for easier understanding from the customer perspective, though in 99% of all cases customers never actually game on 0.2 ammo anymore. If in doubt about FPS figures, please contact the site you game at for more information as each site can have different rules.