Web Cleaner replacement on a Ricoh c5200s printer/copier.

I replace the cleaning webbing on the c5200s without replacing the entire module. This is a long, detailed video, as to show you every step I took and the difficulties I ran into, plus the ones you should be aware of. The webbing itself is not supposed to be a serviceable part, so that's what makes it difficult, but it is a lot less expensive than replacing the entire unit. This is my first and only time replacing this, so please have patience with me. There are no instructions and no videos out there on how to do this, so that is why I made this video. FYI: This end up being a repair video x 3 as I broke a plastic sensor, or two, in the process. (I was able to acquire a new sensor for about 30 bucks, but it was difficult to find.) Be careful of the small fragile plastic bits. I was not very coordinated as I have been on a diet lately and high on coffee. I recommend a yoga type calm when doing this job...just say ohhmmmmm. Feel free to skip to the parts you need or to pause anywhere in the video on high res setting to see how things go together. I sincerely hope this video is helpful/useful to some of you. Additional Codes to clear the error message once you have replaced the cleaning web are under SP1902 button 6 Web Near End/End clear Thank you for watching and enjoy! Sean PS. Oh, please like and subscribe if you enjoyed this or found it useful. www.leagueestates.com