Auto Air Quicksilver Chome Demo w/ Craig Fraser

Quicksilver Chrome Available here: http://bit.ly/QSilverCTX More Training Videos: http://www.coastairbrushTV.com Auto Air Quicksilver Chrome • 4104 Quicksilver Chrome is 6061 – T6 Aluminum, a highly reflective, aircraft-grade aluminum. • Do not reduce. Spray directly from the bottle around 20 psi inlet. Quicksilver Chrome has excellent adhesion direct to any surface and can be applied direct to glossy, non-sanded surfaces such as powder-coat, urethane finishes, plastics, and any substrate. • Apply over a gloss black surface, such as 4258 Auto Air Gloss Black • Apply Quicksilver Chrome in very, very light coats. It’s essential that some of the black base be visible through the Quicksilver Chrome even on the direct view. It cannot be stressed enough how light Quicksilver Chrome is applied; too much and the brilliant chrome effect is lost. • Anodized Colors – Mix Quicksilver Chrome 1:1 candy2o for a true, brilliant anodized color. Auto Air Gloss Black • 4258 Gloss Black was developed as the base for 4104 Quicksilver Chrome • Gloss Black is unlike other 4200 Series Transparent Colors in that is has a high gloss finish that stays glossy, even after other colors are applied over it. Remaining glossy is important so that reflection occurs after 4104 Quicksilver Chrome is applied. • Reduction is not required, especially when using as a base for 4104 Quicksilver Chrome. • Drying is extended. Allow 30 – 60 minutes before applying 4104 Quicksilver Chrome.