They Said It Couldn't Be Done....

In this episode, we install 13" inch Legends Revo Arc Rear Shocks with Remote Reservoirs on our 2005 Harley Davidson Road Glide. We purchased them through Deadbeat Customs. Detailed instructions on the install below!! https://deadbeatcustoms.com/ #harleydavidson #bagger #roadglide USE OUR LINK BELOW TO GET 15% OFF YOUR EAGLE LIGHTS PRODUCTS TODAY!! OR USE COUPON CODE: VP_CUSTOMS AT CHECKOUT. www.eaglelights.com/vp_customs/ Instructions for installation of 2009-2013 High Mount Reservoir Brackets on 1998-2008 Touring Bikes: We were able to mount the Remote Reservoir Mounting Brackets for a 2009-2013 Touring Bike on our 2005 Harley Road Glide by removing the stock "U" bracket/ license plate bracket. To keep structure in the rear of the bike, I used "U" bracket delete plates (link below) that can be purchased by many suppliers. By doing this, I was able to mount the reservoir brackets to the fender struts and fender braces. With the mounts in this position, I am still able to utilize the stock quick release sissy bar mounts. I used all hardware/spacers provided by Legends with no additional holes or fabrication necessary. The only additional hardware needed was four 5/16s lock nuts for the supplied 5/16 mounting bolts that would normally thread into the fender support. One necessary modification, to achieve a more factory look, was to notch the stock fender strut covers to clear the spacers on the Remote Reservoir mounts. The remote gas line was mounted to bracket where the rear hard bags mount. To relocate the license plate below the tail light, I used a factory style light rear bar off of a 2009 and up touring bike. License Plate Bar Elimination Bracket- https://www.amazon.com/Rear-Fender-Gr... MERCH WEBSITE---- https://vpcustoms.threadless.com/ FOLLOW US ON INSTAGRAM - @VP_CUSTOMS FOLLOW US ON FACEBOOK - VP_CUSTOMS EMAIL US- [email protected]