Unclogging the Kobra X Print Head (Complete Walkthrough)

This tutorial is overkill for most light clogging. However if you get a deep clog like I did might need to take the whole thing apart. Refer to the Anycubic Wiki for other clog scenarios: https://wiki.anycubic.com/en/fdm-3d-p... To check out my full review of the Anycubic Kobra X, go here:    • Are 3D Printers Terrible Gifts?   If you're interested in getting a Kobra X, please help out this channel by using my affiliate link below: Use my referral link for 5% off: https://store.anycubic.com/?ref=zdhjjpld Save $20 with coupon code: CHYYBCJZYQ The poop basket can be downloaded here: https://makeronline.com/en/model/Kobr... If your Kobra X is clogged, this video walks through what it actually takes to open up the print head, clear a jam, and get everything back together. The print head looks complex with its multi-filament system, but once you see it broken down step by step, it’s much more manageable than it first appears. I go through the full disassembly process, how to safely access the internal components, what to watch out for with wires and small parts, and how to identify and remove the clog without creating new issues. You’ll also see the full reassembly, along with a quick calibration and test to make sure everything is running correctly again. If you prefer the official step-by-step guide from Anycubic, you can find it here: https://wiki.anycubic.com/en/fdm-3d-p...