DFU Mode MacBook T2 Intel-MacOS 

Part six of our 'Make the Most of Your Mac'' video series. ⏱TIMESTAMPS⏱ below! In this video, we show you how to gain access to DFU Mode on your Intel-MacBook equipped with a T2 Security Chip, when your device is unresponsive, using an Intel-MacBook Pro and another working Intel-Macbook Pro. Before you begin make sure you have:- The latest version of Apple Configurator installed on a Mac running macOS 12.4 or later - UPDATED Nov. 2022 A supported USB-C to USB-C charge cable, such as the one sold by Apple (may not be available in all countries or regions) or a supported USB-A to USB-C cable The USB-C cable must support both power and data. Thunderbolt 3 cables aren’t supported. These revive and restore instructions cover the following Intel-based Mac computers with an Apple T2 Security Chip: iMac (2020) Mac Pro (2019) Mac mini (2018) iMac Pro (2017) MacBook Pro (13-inch, 2020, Four Thunderbolt 3 Ports) MacBook Pro (13-inch, 2020, Two Thunderbolt 3 Ports) MacBook Pro (13-inch, 2019, Four Thunderbolt 3 Ports) MacBook Pro (13-inch, 2019, Two Thunderbolt 3 Ports) MacBook Pro (13-inch, 2018, Four Thunderbolt 3 Ports) - Display failed on the Mac used in this video* MacBook Pro (16-inch, 2019) MacBook Pro (15-inch, 2019) MacBook Pro (15-inch, 2018) MacBook Air (Retina, 13-inch, 2020) MacBook Air (Retina, 13-inch, 2019) MacBook Air (Retina, 13-inch, 2018) ⏱TIMESTAMPS⏱ 0:20 min | When your Mac becomes unresponsive you must REVIVE first to avoid data loss. If REVIVE does not work and data loss is not important, you are then able to RESTORE. 0:35 min | You will need a second 'Supporting' Mac to access DFU Mode on your failed device 0:48 min | Put your own failed Mac in DFU Mode via Apple Configurator 2 on a 'Supporting' Mac 1:16 min | Next Steps 1:36 min | Step one. Download and install Apple Configurator 2 app on the 'Supporting' Mac Download Apple Configurator 2 on your 'Supporting' Mac: https://support.apple.com/en-ca/apple... 2:01 min | Step two. Disconnect external devices from both Macs 2:35 min | Step three. Ensure both Macs are on a level surface with good ventilation and no vibration 2:55 min | Step four. Turn on your secondary 'Supporting' Mac and open Apple Configurator 2 3:20 min | Step five. Plug a USB-C Cable into the Front-Left USB-C port on your failed Mac 3:37 min | Step six. Plug the opposite end the same USB-C Cable from step five into the secondary 'Supporting' Mac - A USB-C to USB 2.0 will work with older 'Supporting' Macs. 3:56 min | Step seven. On your own failed Mac, Press-and-Hold the 'Power Button' immediately followed by 'Right Shift'+'Left Option'+'Left Control. Continue holding all four keys for 10 seconds or until 'DFU' is shown in Apple Configurator 2 on the 'Supporting' Mac. Then, release all keys. 4:30 min | Only indicator your failed Mac is in 'DFU mode' is on the 'Supporting' Mac screen. [DFU] 4:49 min | Step eight. If you don't see anything happening on the 'Supporting' Mac, release all keys on your own failed Mac and verify the cabling between the two Macs. Then, 'Press-and-Hold' the 'Power Button' on your own failed Mac for at least ten seconds to power it off. When you are sure that your own failed Mac is powered off, attempt step seven again. 5:26 min | Troubleshooting Tips | How to tell if your Mac is powered on or off when the screen is black There is too much information to miss by not checking out the other videos in this series. Become a PRO USER on the MacBook and turn up your proficiency and confidence in your device!  Subscribe for more PRO TIPS just like this! If you found this tutorial useful, please give us a THUMBS UP and share your comments below!