finding top dead center and 125 degrees before top dead center Yamaha FZ-09/MT-09 2014 2015 2016

See photos in a Google Photo Album I made of camshaft lobe orientation with cylinder 1 at TDC (top dead center) https://photos.app.goo.gl/on5f3YEMgzL... See photos in a Google Photo Album I made of camshaft lobe orientation with cylinder 1 at 125° BTDC (before top dead center) https://photos.app.goo.gl/W6iWpSYRQTU... Part 10 of 46 playlist    • Yamaha FZ-09/MT-09 2014 2015 2016 Valve Cl...   Valve Clearance Check and Adjustment on FZ 09, MT 09, FJ 09, Tracer 900, XSR 900, MT 09 Tracer, 2014 2015 2016 2017 2018 2019 2020 If you have any constructive criticism, corrections, or tricks to make the procedure easier, please leave a comment. Before you forget, please subscribe and click the thumbs up (if you liked the video)….it will motivate me to make more content. If you don’t like the video, please tell me why in the comments so that I can improve…Thanks Robert The videos were created when I adjusted the valves on my 2016 Yamaha FZ 09. The shots of the manual are taken from the 2014-2016 FZ 09 Yamaha service manual. Disclaimer: I have done my best to provide accurate information, but as with everything on YouTube and in life, do your own due diligence(Due diligence is an investigation or review performed to confirm facts or details of a matter under consideration). I accept no responsibility for errors or omissions. Perform service at your own risk and liability. Check the service manual for your own particular year and model. I can’t verify this, but the procedure performed for the actual valve clearance measurement, camshaft removal, bucket and shim removal, and timing chain/cam cap reinstallation should be similar for the above models and possibly for other similar motorcycles (Check the service manual for your own particular model cross referenced to the VIN). For instance, the intake camshaft Yamaha part number 1RC-12170-00-00 CAMSHAFT ASSY 1 is used across the different models and years listed above. Yamaha made a big change to the MT 09 and related models starting in October 2020 when the engine displacement was changed from 847 cc to 890 cc. How you can help me: Subscribe (it’s free and makes YouTube love me) Click the thumbs up if you liked the video-it’s free. Share a link to other potential motorcycle mechanics who might be interested Show your appreciation (if this video helped you) by buying me 1 to 5 coffees at $5 ea Pay securely with a credit card or google pay by clicking this link: https://www.buymeacoffee.com/thanksro... Happy Wrenching and Riding! Robert