How to replace bearings in an FPV / Drone electric Motor || Hyperlite type motor

This is an in depth bearing change on a Hyperlite 2307 / 2522 Electric Motor. Followed by Tips and Other Motors after the 6min. mark. I made this video to give viewers an in depth look at changing bearings on electric motors without using a press. Listed below is a description of the Bolts ,nuts, and washers you will need to make your own tool to press in the bearings. 1-30mm Long M3 thread bolt. Head can be Screw, bolt, or allen head. 1-M3 thread Nut for M3 the Bolt 2- Washers slightly wider than your bearings. In this case 9mm wide 2-Washers slightly smaller in diameter. In this case 8mm wide. The 8mm wide washers help distribute pressure from the Nut and driver across the larger washer and bearing surface. (made with #spliceapp - http://get.spliceapp.com)