2013-2019 Ford Escape DIY Remote Starter Installation Video

LINK to all 2008 to 2022 Ford Escape with Key Ignition DIY Remote Starter Kits: https://n9.cl/7bvede 100% In-Vehicle Programming: NO computer, internet access, system updates, or dealer programming needed: Just 2 keys to your vehicle are all that's required to program this system to your vehicle: 100% Plug-In T-Harness Installation: No wire cutting or splicing. 3 plugs to your vehicle is all that's required to install this system into a 2018 & 2019 Ford Escape. 2 on the steering column and 1 at the vehicle's OBD2 connector below the driver's dash. Works Using Your OEM RKE (Remote Keyless Entry) Remotes: Pressing LOCK 3 times (w/Horn beep) on your OEM remote will activate the remote starter, OR, upon request, we can program it for you to activate by pressing the LOCK/UNLOCK/LOCK sequence (w/o Horn beep). Option choice provided during checkout. Settings cannot be changed after installation (unless you send the control module back to us). Remote start activation range will be the same as the distance that you can currently lock & unlock your vehicle's doors from your factory remote. Vehicle-Specific Factory Fit T-Harness: No wires or extra plugs to sort through that are left over and not used, meant for other Ford vehicles. This provides an easier-to-understand installation and a cleaner, more professional-looking install when finished. The plugs on the provided T-harness have just the connections you use for your specific vehicle, nothing else. Vehicle-Specific Step-by-Step Installation Guide: A clear & concise illustrated step-by-step installation guide that will walk you through every step of the installation. Written by professional installers for the DIY installer. Installation Information: Just 3 plugs on the vehicle are removed and plugged into the system's T-Harness. 2 are located on the steering column and one at the OBD2 diagnostic connector mounted below the driver's dash. Then the 3 identical plugs from the T-Harness are plugged back into where the vehicle's connectors were removed. To access the required connections, the vehicle's steering column covers need to be removed, and the vehicle's lower knee-bolster panel is also removed for routing and securing the system's wiring harness and control module (nylon zip ties are supplied for securing the system). That's it. The rest is just the system activation and programming procedure. The complete installation shouldn't take more than an hour. #ford #diyautomotive #remotestart #diyauto #fordaccessories #remotestartinstallation #remotecarstarters #remotecarstarter #remotestarterinstall #fordremotestart #diymechanic #diyremotestarter #fortinevofort4 #fortinevofort3