Harbor Freight Tool Haul #44: Pittsburgh Go-Thru Socket Set (Low Profile Bonus!)

#HarborFreight #PassThru #GoThru In this video we take a look at Pittsburgh's Go-Thru Socket Set. While it is obvious where this will serve, it also serves as a surprising low profile socket set! Time Stamps and Links @0:00 Recap @2:20 Pittsburgh 62305 SAE and Metric Go-thru Socket Set, $24.99 https://www.harborfreight.com/sae-met... @3:10 72 Tooth Ratchet @3:30 Packaging @4:15 Reason for Purchase -I basically had to help run a series of nuts down to hold pallets and lights up in the air...yeah, I know. @8:50 Set Organization -Had a really nice plan, but sadly can't execute it given the design of the sockets --I'd have to print off 3/4" Hex Profiles to make any sort of upgrade over the included tray ---If you can ever open it without dropping a few sockets you are doing something impressive @10:45 Socket + Ratchet @11:25 Low Profile Potential @12:25 Stahlwille Wrench Test -Will work with 3/4" or 19mm just fine @13:30 Capri Ratcheting Wrench Test @13:55 Icon Ratcheting Wrench Test @14:40 Socket Contents 5/16" to 3/4" and 10-19mm @15:40 Frequency of Use -The average person isn't likely to use the pass-thru function very often --Some people will use it a lot @16:04 Astro Nano vs Pass Thru Sockets -The 1/2" Drive 9/16" Astro Nano is pretty much the same height as the Pittsburgh --The 3/8" Drive 9/16" Astro Nano is a bit shorter than the Pittsburgh @18:07 3D Printed Storage? -There just isn't a great on the shelf storage option for these @18:30 Extension -Sockets nest into the extension and the extension plugs into the socket body @18:56 3/8" Drive Adapter -This is an interesting piece. It allows you to run standard 3/8" Drive sockets with the pass thru ratchet. The backside is oddly shaped, but holds hex bits...not sure when that would be very useful, but I suppose it is another selling point. --Pass Thru, Low Profile, and Bit Driver @21:21 Packaging Highlights @22:25 Back to the Profile 1.250" Ratchet + Socket Profile @23:19 Zingin' -While a wrench will work for most situations, when dealing with LONG runs of threaded rod and imperfections, the ratchet is nice to have @24:00 Recap @24:56 Your Thoughts? @27:15 Conclusion Alpha Gloves* Get my gloves! Use Discount Code "LoneStar" for your own pair of Alpha Gloves: https://alphagloves.us/ **Links** Forum: http://www.lonestarmopars.com/forum Facebook:   / lonestarmopars   Instagram:   / lonestarmopars   Twitter:   / lonestarmopars   Music: "Gearhead" by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License https://creativecommons.org/licenses/...