140 mm średnicy i tylko 2 cm mocowanie! Czy to się uda? Testy narzędzi ISCAR i sprawdziany GO/NO GO.

In today's episode, I’ll show you how we tackled machining a 140 mm diameter shaft with a minimal workholding of only 20 mm. We will perform GO/NO-GO ring gauge inspections and test both new and proven ISCAR tools. What will you learn from today’s episode? 🔥GO/NO-GO Testing: See how these gauges provide a definitive answer on thread tolerance. 🛠️M115 x 2 Thread Machining: How we managed a large thread on a short grip. 💡Wiper Geometry: How to achieve precision turning and a surface finish of RA 0.4. Chapters: 00:00 Intro: The challenge of a 140 mm shaft 00:45 Workpiece specs: RA 0.4 finish and M115 thread 01:09 Tool selection and technical support from ISCAR 01:40 Roughing: Strategy for minimal workholding (20 mm) 03:19 Process control and insert durability 04:04 Surface finishing and technical grooves 04:55 Precision turning with Wiper geometry 05:37 Threading the M115 x 2 06:05 Quality Control: GO / NO-GO ring gauges 06:32 Pocket milling and Multi-Master chamfering 06:53 Second setup and sub-spindle pick-up with soft jaws 07:44 SumoCam drilling and final results Don't forget to leave a thumbs up and subscribe to the channel to stay up to date with our new videos! Check out our previous video where we used twenty ISCAR tools for a single job:    • Prawie 20 NARZĘDZI ISCAR do jednego detalu...   The tools used in this process are from our trusted partner ISCAR. You can find more information about them here: https://www.iscar.com/ Do you have an "impossible" project? For AMS CNC WIZARDS, nothing is impossible! Visit our website: https://amscncwizards.com/ Contact us: [email protected] Call: +48 730 793 560 #amsr #cnc #dmg #steel #cncmachining #dmgmori #haas #milling #iscar