Jak zmierzyć spadek napięcia na przewodzie plusowym od alternatora do akumulatora pod obciążeniem?

How do I measure the voltage drop on the positive cable from the alternator to the battery with a multimeter? The voltage drop on the positive cable from the alternator to the battery under heavy electrical load should be between 0V and 0.2V. Values ​​above this value may indicate a problem with the positive terminal, the connector at the starter, the connector at the alternator, or a damaged positive cable somewhere. First, it's worth inspecting the terminal and possibly replacing it if it's overheating. Next, check the connections, and finally, possibly replace the entire positive cable from the alternator to the battery. The typical cross-section of the positive cable is 16-35mm², CU. Don't use a smaller cross-section than the original cable, but a larger cross-section is possible and recommended, which will reduce the cable's resistance under heavy electrical load. 👊 SUBSCRIBE TO FORUMWIEDZY YOUTUBE ► https://bit.ly/2XSLq36 and click 🔔 👀 FOLLOW FORUMWIEDZY INSTAGRAM ► https://bit.ly/3aqY3oC 🔴 PINTEREST ► https://bit.ly/2KlMHrk 🔵 FACEBOOK ► https://bit.ly/2RQXiOX ⭐️ TWITTER ► https://bit.ly/2wUQ8SN 👉 WWW ► https://www.forumwiedzy.pl 💡 Leave any questions, comments, concerns, or suggestions in the comments below the video. 😀 ❗️ Subscribe to the "ForumWiedzy" channel to never miss new videos 👀 🎥 Share this video with your friends on social media 👨‍👩‍👦‍👦 👊 Best regards #Alternator #Measurement #Voltage #ForumWiedzy #Clamp #Guide #Motorization #Car #Car #Repair #Mechanics #Electricity