How to replace the Top Cover for HP ProBook 470 G4 Series Laptop

How to replace the Top Cover for HP ProBook 470 G4 Series Laptop #AustinLaptop, #DIYLaptopRepairs, #AustinLaptek, #HPProBook470G4, #HPProBookSeriesLaptop, #ALLHPLAPTOP, SIMILAR LAPTOP MODEL: ===================== Top Cover for HP ProBook 470 G4, How to replace the Top Cover, Top Cover for HP ProBook 470 G4, hp probook 470 G4, probook 470, hp probook 450 g6, hp probook 450, hp probook 450 g5, hp probook 450 g2, hp probook 450 g3, hp probook 450 g1, hp probook 450 g4, hp 450, probook 450 g6, probook 450 g5, hp 450 g5, hp 450 g2, hp 450 g6, hp 450 g3, probook 450 g2, probook 450 g3, hp 450 g1, hp 450 laptop, probook 450 g1, probook 450 g4, hp probook 13 inch, hp 450 g4, 450 g5, 450 g6, hp probook 13, ===================== ** This video apply to all HP ProBook 470 G4 and Series Laptop ** If you're looking for the replacement part #, please visit HP partSurfer at https://partsurfer.hp.com and follow instruction to find P/N. Once you have the correct P/N, please Google or eBay to compare the best price before purchase. ********************************************************************* BEFORE YOU BEGIN: If the unit contains heated components, wait until the components have cooled off before proceeding. Put on your electrostatic discharge (ESD) wrist or shoe strap to avoid damaging any circuitry. Place an ESD mat on a suitably grounded surface, and then place the unit on the mat. Remove any devices from the unit being serviced, such as CD-ROMs, SD Memory Card ...etc. Power off the unit and any peripheral devices that are connected to it. Disconnect the power cord from the electrical outlet and then from the unit. When a unit is plugged into an AC power source, voltage is always applied to the unit. You must therefore disconnect the power cord from the power source before opening the unit. Disconnect all peripheral device cables from the unit. ********************************************************************* TOOLS USED IN REMOVAL AND REPLACEMENT. Ensure that you have the tools you need before you begin. These should include: Small, Phillips-head (P1 and P0) screwdriver Small, flat-bladed screwdriver or a flat-bladed alignment tool Tweezers Electrostatic discharge (ESD) wrist or shoe strap Smooth jaw, bent-tipped needle nose pliers (optional) Small, smooth-tipped needle nose pliers (optional) Flashlight (optional) NOTE: If worn or damaged screwdriver tips are used, the small screw heads could become stripped. ******************************************************************* DISASSEMBLY TIPS. Ensure that you take the following precautions when disassembling a unit: Label each cable as you remove it, noting its position and routing. This will make replacing the cables much easier and will ensure that the cables are rerouted properly. Keep all screws with the component removed, if applicable. The screws used in each component can be of different thread sizes and lengths. Using the wrong screw in a component could damage the unit. If the unit contains light-sensitive components such as toner cartridges, store the component in its original packaging or in a dark location to avoid damage. ****************************************************************** As always, please subscribe for more awesome videos. Thanks for watching! https://www.austinlaptop.com