Como instalar regadera eléctrica - 2 Parte - Curso de Electricidad

Greetings. In this second part, I forgot to mention the water salinity. In some areas, the water is slightly salty, and this can be detrimental when installing an electric shower, as salt water conducts electricity. Another point I forgot was the comb-type heating elements, which are common in some models. Finally, the issue of the shower not heating up much could also be due to the low amperage in your electrical network. This can happen in areas where 3 kW meters are installed. Materials for a 5500W shower (220V): Two 32-amp circuit breakers AWG 10 wire or 4 mm² wire AWG 12 yellow wire (ground) One 1/2" PVC threaded coupling One 1/2" x 35 cm PVC nipple (threaded on both ends) Teflon tape Electrical tape One PVC junction box for one circuit breaker If you did not install conduit, you will need to use PVC cable trays. You must check your meter and ensure it is supplied with at least AWG 10 wire. If you have any questions, please feel free to contact me, and I will gladly assist you as long as the question is within my area of ​​expertise.