AVIOS (PNF) C-130 V2 US Coast Guard Scale Turboprop (1600mm) • UNBOXING • (English/Français 4K)

AVIOS (PNF) C-130 V2 US Coast Guard Scale Turboprop (1600mm) Buy yours : https://hobbyking.com/en_us/avios-pnf... Instructions manual : https://cdn-global-hk.hobbyking.com/m... ❌ Book CG 65mm : CNHL 4S 2200 40C 275gr placed??? 📏 Triple Rates in millimeters (my own low / book’s low rates / 100%) : Ailerons : 8/10/20? Elevator : 10/15/25? Rudder : 8/10/30? Inboard flaps : 11/22 Outboard flaps : 30/45 ⏱️ Flights & remaining voltages : -Maiden (filmed) CNHL 4S 2200 40C 275gr : Improvements of the Avios C-130 V2: • Two brand new hi-viz, vibrant and lightweight color schemes • Improved direct pushrod rudder linkage with rear-mounted rudder servo • Flap geometry has been improved to achieve more movement • Reduced wiring and no surplus deadweight in airframe • A reduction in overall weight giving much improved slow-speed handling characteristics Features: • A beautiful scale model of the classic Lockheed C-130 turboprop • Working flaps, retractable landing gear with door sequencer, landing lights, nav lights, working cargo door • Factory-installed motors, ESCs, servos, wiring, and quick connect/disconnect wing electrical connectors • Scale 4 bladed propellers • Separate 5V-3A BEC unit • Airframe beautifully molded in tough EPO foam • Fast, and easy to assemble, no glue required Specs: Model: AVIOS (PNF) C-130 V2 US Coast Guard Scale Turboprop w/Retracts & Flaps Wingspan: 1600mm Length: 1195mm Flying Weight: 2350g (inc battery) Motors: 4 x 2627-1000KV brushless outrunner ESC's: 4 x 18A brushless (non BEC) BEC: 5V-3A Servos: 14 x 9g Propellers: 4 off 6.5"x5" 4 Blade Channels: 7 required, 8 is advisable for mixing the flaps Battery (Required): 2200mah 4S (14.8V) Included: 1 x AVIOS C-130 V2 US Coast Guard EPO airframe 4 x 2627-1000KV brushless outrunner 4 x 18A brushless ESC 4 x 6.5"x5" scale 4 blade props 14 x 9g servo 1 x Set of servoless retractable landing gear with door sequencer 1 x Working cargo door with cabin light 1 x LED daylight visible nav-light system 1 x Set of scale detailing parts 1 x Set of pushrods and connectors. 1 x Set of assorted screws 1 x Quick-Start set-up guide Required: 7-8ch channel or more transmitter and receiver 4S (14.8V) 2200mAh LiPo battery w/XT60 connector Suitable LiPo battery charger