Atlas Snap Switch - Any Scale - Turnout Setup For All DCC Systems - Digikeijs DR4018

This setup will work with any scale (Z - G) snap switch as long as your DCC system has the ability to throw a turnout. !!! Notice !!! For the snap turnout you don't need to program anything. They work right out of the box since the default is already set to 0. So the first one doesn't need anything done to it. Hook it up and you are good to go. The first turnout will be on 1. Now 2 - 5 will need the start address set. On the second one, press the red button and throw a turnout command to address 9. Now the first output will be on 9. On the third one, press the button and throw a turnout command to address 17. Now the first output will be on 17. And so on. Just by setting that first number sets all the other 7 outputs automatically. ___________________________________________________________________________________________________ The DR4018 has been replaced by the YD8116: https://www.ironplanethobbies.com/pro... For the Atlas products please visit us at: https://www.ironplanethobbies.com/pag...