Beko bPRO500 cottons 90 (half load)

Washing a load of whites with Ariel fast dissolving powder and lenor pink blossom softener Originally wanted to do this load as a stain test but it wasn’t as dirty as it normally is still of course filmed it as I was in that mood 🥲 Overall this is a very good boilwash it’s slightly longer compared to first generation aquatech due to the final spin and also a little bit of extra wash time The machine heats to 80°C on this cycle very good for a modern machine. Aquatech usage is good and water levels where absolutely perfect no half tub levels for loads like this anymore 😅 Both interms are performed at 600rpm due to it being on 90 if it was a lower temp it would’ve done 1000rpm on first spin Balancing is great to the Blomberg would’ve spent 10 minutes balancing this load then proceed to limit to 600rpm when it got balanced. They’ve improved the balancing SOO much on these beyond series models Results where great after filming I did notice a small patch of staining on one of the t shirts however was told it has been washed multiple times with that stain and it won’t come off 🙃 0:00 Prepare the load 3:54 Start and drain 4:44 Main wash (saturation and sensing) 18:52 Main wash (half load detected begin intensive action) 1:13:55 Main wash (aquatech phase) 1:33:49 Main wash (cool down/anti suds) 1:36:08 First interm spin 600rpm (unbalanced) 1:42:35 First rinse (aquatech) 1:48:44 Second interm spin 600rpm 1:58:01 Final rinse (Aquatech) 2:03:26 Final spin 1400rpm 2:17:28 Anti crease 2:19:32 End and results Note: the tapping you here throughout the cycle is the drain hose hitting of the back of the washer. I have it quite close between the machine and my pipes so it shakes everytime the drum shakes resulting in it hitting the back panel