Профиль скрытой ниши для штор в натяжном потолке под обтяжку с подсветкой. FlexyPRO Standart 60 , 80

We will analyze in detail with you the installation of FlexyPRO profiles for creating covered niches in a stretch ceiling. There will be several options in the video: 1) a more budget option from the Standard 60 profile, its bending height is 6 centimeters. With the Standart 60 profile, I used a regular wall aluminum profile. This makes it easier to join these profiles and stretching the canvas is also easier. 2 ) On the other hand, I used a larger Standard 80 profile, its depth is 8 centimeters and the width of the embedded part (where you can install any of your cornices) is 13 centimeters. I also added an additional Plus 60 module, this element is added to the embedded part and the total width for installing the cornice is already 19 centimeters. And since this large and wide niche is a more expensive option, I used the Euro05 and Euro06 shadow profile on the walls, and why I did it with different shadow profiles, you will see in the video. The docking of the Standart80 cornice profile with a shadow profile is more complicated than with a regular wall profile. You have to cut some elements at an angle. Of course, we will watch the process of stretching the canvas with you from a first-person view. The profile has a groove for the LED strip, which is closed with a light-diffusing plug. These profiles allow you to make a hidden niche for curtains in a stretch ceiling, which will satisfy most of the needs of designers, customers, textile decorators. Link to the presentation of the Standart profile series https://disk.yandex.ru/i/bdvUUzrBtCzaLA