Amplificador de audio con el integrado LA4425 muy fácil de hacer

Audio amplifier with integrated LA4425 ➤ᴄᴏᴍᴘᴏɴᴇɴᴛᴇs: ❯IC LA4425 (x1) ❯CAPACITOR OF 1000uf at 25v (x1) ❯CAPACITOR FROM 10uf to 50v (x1) ❯CAPACITOR FROM 0.1uf to 100v (x1) ================================ ➤📁DIAGRAM: https://mega.nz/file/MgQBxYyI#IjOj7Fv... ================================ THE INTEGRATED CIRCUIT CAN OPERATE FROM 12V UP TO A MAXIMUM OF 16V WITH AN OUTPUT POWER OF 5W ================================ This amplifier is very good due to its simplicity, as it requires very few external components to operate and is capable of controlling speakers of 4 to 8 ohms. Its sound quality is acceptable, perhaps not the best, as distortion becomes noticeable. This is because this amplifier was used in some radios where the sound quality wasn't the best. Therefore, some manufacturers opted to use this integrated circuit because they were looking for simplicity and acceptable audio quality, making it very economical to manufacture using very few components. ================================ [INVENTABLE] Get electronic components from utsource: https://bit.ly/3rLO35N Integrated Circuit Chip: https://www.utsource.net IGBT: https://www.utsource.net/category/ele... Electronic component: https://www.utsource.net Capacitor: https://www.utsource.net/category/pas... Diode: https://www.utsource.net/category/ele... Find chips: https://www.utsource.net Transistors: https://utsource.net/category/elec-co... Darlington: https://www.utsource.net/category/ele... Sensors: https://www.utsource.net/home/sensors