How to Make a 1/12 Scale Miniature Television, DIY TV Craft for Dollhouse or Diorama

How to Make a 1/12 Scale Miniature Television, DIY TV Craft for Dollhouse or Diorama Today we’re making a 1/12 scale television with interchangeable screens and you can switch from having the television on a stand to a wall mounted tv. This diy television is perfect for dollhouses, action figure dioramas (such as Marvel Legends), or if you just want to take some fun pictures of your toys watching tv. The materials you’ll need to make your own #miniature 1:12 scale television are: Paperboard such as from a cereal box 2 popsicle sticks ModPodge: http://amzn.to/2kPTo9D (Amazon affiliate link) Scissors Ruler or a t-square http://amzn.to/292UUiz (Amazon affiliate t-square link) Pencil Paper Black Acrylic craft paint Sealant Paint brush And then some optional materials I’ll be using but if you don’t have, you can substitute something else: Puffy paint Super glue Magnets, which I’ll be using a cheap sheet magnet, you know the kind that local business sometimes give out that has their company logo and maybe a calendar on it and some 5 mm disc magnets (you’ll need 4) I get mine from Ebay: https://rover.ebay.com/rover/1/711-53... (Ebay affiliate link) Pruning shears Xacto knife http://amzn.to/2ll2Ezk (Amazon affiliate link) Packaging tape Mounting putty Needle Sandpaper The first step to make the television is to start measuring and cutting up the paperboard and popsicle sticks. The paperboard and sheet magnet form the television screen, while the popsicle stick makes the base. The measurements you’ll need are included in the video The smallest piece of popsicle stick will become the miniature tv remote. I sand down the two bottom corners of the remote so that the bottom of the remote will be slightly rounded. Next I glue the 4 back pieces of the tv together using the mod podge and glue the sheet magnet on the top. Next paint the interior edge and front of the frames before gluing them down. Then I take the two popsicle stick pieces that will form the base of my stand and cut out a piece of paper slightly smaller than them. I’ll glue the two pieces of the base to this paper to help keep them together. Then I take the third piece of the stand, and insert it into the notch I cut in the base and glue it down. While the base is drying, we can go back to the tv and glue on the frame. Next, paint the tv stand black. After the frame has dried on the tv, I sand all four edges of the tv on some sandpaper to help level them out. Then you can begin to paint the remaining sides and back of the tv black. If you didn’t use a magnet, paint the screen black too. For the remote control, I form the buttons out of puffy paint, but you can use regular paint. Once the tv and stand are dry, I measure the central point on the back of the tv and put two marks down about 1 cm from the bottom and 3.5 cm from the bottom. This is where I’ll be attaching my disc magnets. I measure similar points on the arm of the stand. If you don’t have magnets, you can always just glue the stand directly to the tv. I like magnets thought to give me more options to switch freely between the stand and a wall mount. As for sticking the tv on a wall, I just used more poster mounting putty. I use super glue to secure the magnets in their places. After the super glue is dry, the tv is done, I’m going to make some interchangeable screens that I can stick on the magnetic tv screen. I use a free software called Paint.net to scale the images down to about 8.4 cm wide and 4.7 cm tall. Then I print them and to prevent the ink from smearing, I apply a layer of packaging tape on the front and back of the image and cut it out. I glue small squares of the sheet magnet to the four corners of the image using superglue. Just make sure you test your magnets first to make sure you are gluing the correct side down so that the image will stick to the tv screen. If you don’t have magnets, you can use a small piece of tape to switch between screens. Music: Youtube Free Music: Cylinder Nine by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...) Source: http://chriszabriskie.com/cylinders/ Artist: http://chriszabriskie.com/ Want to share your project photos with me? Either link them below, or send them to me at: Zubbie’s Social Media Info: Facebook:   / zubbiecreations   Instagram:   / zubbiecreations   Twitter:   / zubbiecreations   Tumblr:   / zubbiecreations