How to install a multipoint lock into a timber door

This video runs through the process of installing a multipoint lock into a timber door. The door handle wasn’t installed in this video as the customer was still undecided as to which one they wanted and the setting out is different between the handle ranges and I didn’t want holes where I didn’t need them. Definitely best to wait.... Here at A P Bourne we undertake all aspects of bespoke Carpentry And Joinery from a jigsaw board holder to a curved roof. Nothing is generally to much trouble for us to undertake. Should you require anything bespoke and made using timber please don’t hesitate to contact us. Our email is below.. Also have a look at what we currently have for sale on our website, you may find something of interest. Thank You Adrian Email [email protected] Website Address https://www.apbournebespoke.co.uk/ 00:00 Lay the lock on the door and transfer marks around the door. 00:06 Ensure the top and btm shoot bolts are flush.. 00:09 Lock in unlocked position and mark for cutting. 00:19 Transfer marks to the front of the lock 00:21 Cut to length 00:34 Check cut 00:41 Transfer earlier marks 00:50 Install Selected cutter into selected router 01:01 Attach router jig/fence 01:11 Set cut depth 01:27 INVOLVE THE FAMILY 01:47 Rout deeper sections 02:38 Check fit and adjust if necessary 02:46 Mark out and cut the top and bottom rebates 03:28 Mark out for main lock body 04:00 Drill out for handle and eurolock 04:30 Check the lock fit 04:38 Fit and finish