Dezansamblare partiala si curatare Expresor Krups

Because I found water under the espresso machine or in the area of ​​the grounds drawer, coffee remains in the tray underneath, I decided to partially disassemble the #krups #expresser and clean it. Inside I found a lot of hardened #coffee, even difficult to remove, and I used a small plastic scraper, a brush and dry wipes. Tools: #torx 10 and 15 screwdrivers, plastic spatula. Remove the screws in the order shown in the video. Remove the covers carefully so as not to break the clips. Take pictures or videos to see what you remove and where you need to put them back. Do not use sharp objects, so as not to pierce the hoses. Finally, be sure to center the piece indicated in the clip so that its spring is in the middle of the channel through which the coffee falls from the grinder, the piece is centered on the bottom one, so that water does not flow past the seals, and the blade from the grinder channel is not caught in/under the spring. In the final part, you can see how it should work and the operating error was from what I told you above. Once everything was centered (it took me 1 hour of trying to understand why it wasn't working and 3 attempts to center the piece) the operating cycle was normal. ATTENTION! I cannot be held responsible if you disassemble your espresso machine and it stops working! This clip is for illustrative purposes, I am not a KRUPS TECHNICIAN, I do not service espresso machines, I try through my experience to make your work easier and not waste a lot of time on this operation. I mention that my expresso is no longer under warranty. If you liked it, you can give me a rating, you can subscribe to my channel to see when I post other videos. Thank you! ✌️