DRZ400 Stator "Loctite" Fix EP-6 |#drz400 #drz400sm #suzukidrz400 #drz400s #suzuki DRZ 400

Suzuki DRZ-400e Loctite Stator Fix #drz400 #drz400sm NOTE: on part 12:45 where we recommend 19ft pounds this is called out in the clymer manual for the drz. However, many folks are arguing the torque spec should be 10ft pounds. I can only assume the OEM has used both grades, as I'm positive the fasteners I've replaced in this video were not grade 10.9 In that light, replacement of the OEM fasteners is still recommended, so you know you have a good fastener of known condition and grade. Use a 10.9 or 12.9 and follow the recommended torque spec’s for your chosen grade. 10.9 - 120 inch pounds (10 ft lb) 12.9 - 144 inch pounds (12 ft lb) We recommend consulting with your manual or mechanic for correct specs. Again this is a video documenting our drz400 rebuild we are not claiming to be professional mechanics, do this at your own risk. Below is the manual with the specs. https://www.manualslib.com/manual/120... Here is a tutorial on how to perform the DRZ400 Stator Loctite Mod. A complete outline can be found here: https://www.thumpertalk.com/forums/to... Here is a list of the parts we used: Allen bolts = M6 x 1.0 (Qty 3) https://amzn.to/47fOfw1 Loctite Thread locker Red 271 Red https://amzn.to/49mmBPc Loctite 209728 Heavy Duty Blue 242 https://amzn.to/3QumCb6 Stator Gasket https://amzn.to/3Sv2g4e Starter O-Ring https://www.ebay.com/itm/163750985551... Torque Wrench = TEKTON 24335 1/2-Inch Drive https://amzn.to/4723IiQ Permatex 81950 Ultra Slick Engine https://amzn.to/49mqfIV #suzukidrz400 #loctitefix #drz400e #drz400s #drz400sm #drz400