Як правильно і коректно запустити Smart TX та Smart Socket від Deye - заводимо Лору!

Overall - the result is great. Everything started, everything works. However, figuring out what the correct sequence of turning it all on should be and what signal beacons to focus on - it took several days... So - I hope this video will help save a lot of nerve cells )) Let's go! Instructions on how to turn on the Smart TX and the smart socket from Deye (instead of the smart socket, any other smart device from the Deye set can be used). 1. Connect the Smart TX to the RS485 Meter port on your Deye inverter. 2. Check if the Smart TX has powered up (two blue diodes should light up) - if so - it means your inverter can supply power via an Ethernet cable and you don't need to do anything extra. If not - if the diodes on the Smart TX do not light up - give it a separate power supply of 5 volts, exactly 5, not 9/12/24, strictly 5. you can use an external source, you can take it from +/- on pins 7/8 of the inverter as I will do in the end using this cable: https://s.click.aliexpress.com/e/_c3x... 3. In the settings menu in Advanced functions, set3, in the "Meter Select" field - put Smart TX. 4. In the same settings tab, put a checkmark in "Grid Tie Meter2". Confirm. The right blue diode (the one that is RS485) should start blinking about once a second. The left LoRa diode should still be constantly on, and this is normal! 5. Go to the "Smart Devices" tab in the settings, select Switch (let's connect only one socket), enter its serial number directly from the inverter screen. Click on "Enable", configure as we want, click on "OK". 6. We turn on our smart socket from Deye in a 230V socket. And follow the LoRa connection procedure. To do this, press the power button on the socket for 3-4 seconds, release it, the diode on the button should start blinking quickly. After a short time (approximately 1 second), press the power button again 1 time briefly. The diode's blinking frequency will change, the radio channel search will start and the socket will find the smart TX. If successful, the diode on the socket on the power button will be constantly on. In a second or two, the left LoRa diode on the Smart TX will also start blinking this time with a frequency of about 1 time per second. 7. Congratulations! You have configured your first smart device from Deye. Now play with the settings and check all the interesting and necessary scenarios. Now you have a gen port INDEPENDENT smart load, with significantly expanded capabilities and scenarios. Many thanks to the Deye brand for providing the materials for creating this video. And also thanks for the help with the settings, and procedural system updates. Other smart devices from Deye, such as CT-01 - smart meter, smart switch Smart switch (25A, three-phase), as well as smart electric car charging - all these elements will be reviewed and launched a little later, so subscribe so as not to miss. General overview of all smart devices from Deye here:    • Smart-прилади від Deye - що воно таке і що...   Become a sponsor of this channel to receive bonuses:    / @bkwindsolar   Donate to PayPal: https://www.paypal.com/donate/?hosted... Donate to Monobank: https://send.monobank.ua/A8KxonjKUD