At Long Last! 5.0 Resto 1987-1993 Fox Body Mustang Center Console - Review & Full Install

As you hear me say in other videos, the center console for a 1987-1993 Fox Body Mustang has been a long time coming! Trust me when I say this. We had to go through quite a few revisions before we felt like it was right. After all, we’re dealing with Fox Body Mustangs; not one is ever the same! The 5.0 Resto 1987-1993 center console is a reproduction of the original with a few subtle changes to make it better. The console incorporates OEM dimensions and tolerances, factory grain and texture, and accurately placed mounting locations. The changes that we did with the 5.0 Resto console are listed below: 1. The upper area under the shifter bezel has material removed so you can service the shifter assembly without removing the entire console. 2. Instead of plastic nut-serts at the front of the console that secure the top panel, we include two metal j-nuts. The metal j-nuts are a much better long-term solution than the plastic nut-serts. 3. The rearward tabs at the rear of the console that help secure either the factory armrest assembly or a delete panel were extended approximately 1mm. Doing this helps secure the previously mentioned components. Remember, the areas around the radio are charcoal black. We have this paint listed under the FV7 color code in the store. Product Links Center Console: https://lmr.parts/LRS-61045CA-K Center Console Parts: https://lmr.com/products/79-93-Mustan... Sand Free Adhesion Promoter: https://lmr.parts/SEM-38363 Interior Paint: https://lmr.com/products/79-93-Mustan... Watch Center Console Removal:    • How to Remove Your Center Console Fox Body...   5.0 Resto Cup Holder Top Panel:    • 1987-1993 Fox Body Mustang 5.0 Resto Cup H...   Tool List Microfiber Towels Grey Scuff Pads, Bucket, & Dish Soap Plastic-safe Prep Spray Mask that is Suitable for Painting Assortment of Masking Tape & Paper (1/8”, 1/4”, 3/4”, 1-1/2”) Drill, Unibit, Drill Bits (or a Dremel Tool) Needle & Regular File Set Phillips Head Screwdriver Set 1/4” Socket Set & Ratchet Torx Driver Set Blue Thread Locking Compound Chapters 00:00 - Video intro & explanation. 00:45 - Unboxing the center console. 01:25 - Center console overview. 4:28 - Explaining what we're doing in the video. 05:21 - Center console removal. 12:52 - Prepping the center console for paint. 16:24 - Painting the radio area charcoal black. 19:49 - Masking the radio area. 21:19 - Drilling the hole for the fuel door release switch. 23:50 - Painting the console. 25:37 - Unmasking the console & fixing the overspray. 27:35 - Installing the radio bracket onto the console. 30:30 - Installing the console into the car. 46:33 - Final thoughts & outro. #lmr #foxbody #restoration Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-vide...