Chevrolet Cruze - Reset / Clear TPMS Tire Pressure Light (2008 - 2016)

Step-by-step guide on how to delete yellow TPMS (Tire Pressure Monitor System) tire light on the instrument cluster on first generation Chevy Cruze sedan. ( 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | LS | LT | LTZ | 1.8L | 1.4L ). Typically you will need a TPMS scan tool to reset the light as you have to "train" each tire sensor. Sometimes it is doable by releasing air from each tire, if it doesn't work for you scanner will be necessary. To start you will have to enter tire learn mode. To do that press menu button on the turn signal light switch, scroll down to tire pressure and then press and hold set/clr button on the same switch. Select Yes when prompted and tire mode will be active. Horn will beep twice. Now proceed outside and start relearning the sensors in this order: front left, front right, rear right, rear left. Once done horn will again beep twice and tire light should be off and each sensor should report the tire pressure on the speedometer screen. Thanks for watching. Don't forget to Like the video / SUBSCRIBE to the channel! ⚠ DISCLAIMER: While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.