Side Mirror Replacement for 2013-2016 Ford Escape: HOW TO ESCAPE

Here's a tutorial on a 2013-2019 Ford Escape Side Mirror Replacement. This is for the whole housing. AMAZON LINKS: Plastic Trim Tool Kit: https://amzn.to/3sAWhxr Requested by user N Gaming Hub, here is a tutorial on accessing and removing the hardware necessary to replace your side mirror on your 2013-2016 Ford Escape / Kuga. This is best achieved by removing the interior door panel as shown here. TOOLS NEEDED: 7mm driver Small flathead driver T30 Torx Driver Trim tools (plastic / non-marring) TORQUE SPECS: T30 screws = 8 Nm = 71 lb-in #2013fordescapesidemirrorremoval #howtoremoveasidemirror #howtoescapewithrahrena CHAPTERS: 0:00 Introduction 1:04 Remove latch cover panel and 1:30 Remove window control panel 1:52 Disconnect window control wire harness with small flathead screwdriver 2:05 Remove the QTY 2 x 7mm screws 2:18 Remove the red reflector and 7mm screw from door side 3:27 Disconnect any remaining connections to the door panel 4:05 Lift away interior door panel! 4:15 Remove interior side mirror cover panel 5:32 Disconnect side mirror wire harness 5:48 Remove QTY 3 x T30 Torx Screws 6:02 Lift the bottom of the mirror assembly and remove it 6:31 Install your new mirror assembly 7:11 Reinstall wire harness 7:19 Reinstall your side mirror interior cover panel 8:07 Reinstall door panel on window edge with window control pulled through the access hole 8:14 Press lower door panel point tabs back into door body 8:18 Reinstall lower 7mm screw 8:27 Reinstall QTY 2 x 7mm screws behind door handle 8:34 Reconnect and reinstall window control panel. Insert front and rock downards. 8:41 Reinstall the 7mm screw behind the main door latch and reinstall screw