Diagnostics - A simple load test
In this video we are going to perform a simple load test using a 55 watt lamp, a jumper pack / battery, and simple tools. The idea behind this is to put a load in a single wire that you suspect to be faulty in order to burn it off, thus confirming your suspicions. The amperage a multimeter sends out during diode/continuity tests is far from enough to burn off any strands in a wire, so you will get a good reading even if there's just a single strand holding the wire together.
▶︎
Understanding How To Test Voltage Drops (Part 1)
▶︎
Em415 Pro Short Detector: Explanation of how to use the electrical short circuit detector and loc...
▶︎
Reviewing 3 Load Testers That You Should Add To Your Toolbox!
▶︎
Continuity vs Load Testing (12VDC circuit)
▶︎
This is Why Load Testing Electrical Circuits is so Important!
▶︎
Toyota Master Tech Applies LoadPro | How to use the ESI180 with multimeter
▶︎
How to find a short with a light bulb!
▶︎
Load Pro test leads...how to find bad connections and resistance.
▶︎
Never Do This With a Test Lamp!
▶︎
How to Properly Test Voltage Drop in Automotive Circuits (Dynamic Method Explained)
▶︎
LOADpro Operation and Voltmeter-only diagnostics
▶︎
Voltage Drop Testing ~ The BEST Way To Test Wiring
▶︎
Learn How to Diagnose and Fix Car Electrical Problems Series | Part 1 Basic Electrical Principals
▶︎
Which Parasitic Draw Test Method is REALLY the Best?
▶︎
How to test for a short to ground (ohmmeter vs test light)
▶︎
Fix Electrical Problems by Understanding Voltage Drop Testing
▶︎
Troubleshooting automotive wiring the easy way, with a Load Pro! "New Tool Day Tuesday"
▶︎
How I Use the LOADpro & Power Probe | Fuse Testing, More Voltage Drop and Real Circuits
▶︎
Easiest way to find a short to ground!
▶︎