Nova Ryoku 80Nm 21V (13mm) TRAVOU! Barulho de engrenagem nos Testes

Description: Today I tested the new Ryoku 21V 13mm (impact drill) advertised with 80Nm in real-world construction and workbench situations. ✅ It performed well with 5x60mm screws for screwdriving. ✅ It performed well in wood (Pérola do Pará) with smaller drill bits (10mm, 15mm, and a 20mm flat bit). ❌ However, with larger drill bits (32mm flat bit and 35mm Forstner bit), it jammed and produced a strange gear noise (especially when switching to speed 1). ✅ It performed well in paving stones with 8mm and 10mm EDA multi-drill bits. ⚠️ It drilled through metal (3mm sheet metal) with a 4mm drill bit, but the noise returned with a stepped drill bit, and the test was not completed. 📌 If you're thinking about buying the Ryoku 80Nm, this video will show you where it performs and where it falls short.