Design a 3D Serving Dish in Vectric VCarve and Aspire

Design a 3D Serving Dish in Vectric VCarve and Aspire More down here ↓↓↓ Click SHOW MORE! In this video, I’ll get into Designing a Serving Dish using the same Vectric Clipart Library used in VCarve Desktop, VCarve Pro, and Aspire. I’m going to demonstrate the design of a 2-sided 3D project. First, I’ll demonstrate adding all of the vectors and 3D components to both sides of the project. Then I’ll show you how I figure out the Shape Heights of the components on the top of the project, and on the bottom of the project. They do depend on one another. I’ll then calculate toolpath for both sides of the project, and share a trick I learned in this year’s Vectric User Group Meeting in September of 2020 to create a nice little foot on the bottom of our bowl. Along the way, I’ll show you a trick for determining the thickness of the material between two models on opposite sides of the project. Finally, I’ll calculate and preview all of the toolpaths to get a look at our serving dish. As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below. On Sunday, November 1st, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. I hope to see you there! Here’s a link to the Live Q&A:    • LIVE Q&A #63 - Design a 3D Serving Dish in...   The formula for determining the Shape Height of the Bottom Dome is: Material Thickness minus the shape height of the foot. Round the result down anywhere between 0.01 inches (0.254 mm) and 0.02 inches (0.508 mm.) This result will be the Bottom Dome Shape Height. The formula for determining the Shape Height of the Top Dish is: Bottom Dome shape height minus the thickness of the material you wish to leave between the top dish and bottom dome. The result is the Top Dish Shape Height. ______________________________________________________________________________ Link to The Trampled Underfoot Podcast. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..." YouTube:    / @trampledunderfootpodcast   Facebook Page:   / trampledunderfootpodcast   Past Episodes available at our website: https://trampledunderfootpodcast.com/ ______________________________________________________________________________ Link to the Vectric for the Absolute Beginner Playlist:    • Vectric for the Absolute Beginner   Link to the 3D Modeling for the Absolute Beginner playlist:    • 3D Carving for Beginners   Link to the V-Carving for the Absolute Beginner playlist:    • V-Carving for the Absolute Beginner   ______________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/p... I’m a proud founding member of the Maker’s Media Network. Come check us out at: http://makersmedianetwork.com/ marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: https://harnealmedia.com/ ______________________________________________________________________________ For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com/ ______________________________________________________________________________ If you’d like to support my channel and help with the making of future videos, you can donate by using any of the following links: StreamLab : https://streamlabs.com/marklindsaycnc PayPal: https://paypal.me/MarkLindsayCNC Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner #NotSponsored