Reparar boton encendido de goma Garmin Montana 600 610 650 680

You can buy this in ebay ( https://www.ebay.es/usr/lasupermarmota ), but you can buy in some other places and replace it by yourself. INSTRUCTIONS ------------ 1. You will need the following: scalpel (xacto knife or similar) Cling film T8000 glue or similar IPA or rubbing alcohol 2. Cut the old rubber where the new button will be placed using the scalpel . Remove the last bits with alcohol. 3. Apply the glue to the GPS. 4. Place the new button in the GPS, and hold it in place using the cling film. . If you have a silicone sleeve, put it on to apply more pressure. 5. After 24 hours, remove the cling film and the excess glue with alcohol.