2GIG-PIR1-345 - GC3 Programming

#homesecurity #diy #smarthome Here you will learn how to program a 2GIG-PIR1-345 wireless motions sensors into the 2GIG GC3 wireless security system. The 2GIG Passive Infrared Motion Detector is a wall-mounted unit with wide-angle motion protection. It communicates with the control panel using the 345 MHz frequency. When set to High (HI) Sensitivity Mode, the PIR has a maximum range of 30 ft deep x 50 ft wide (9.1 m x 15.2 m). The PIR’s pet-immune feature can be set to tolerate animals up 55 lbs. Features Dual element sensor with 30 ft. by 50 ft. range 33 or 55 lb. pet immune 90-degree look down 110˚ spread 3 different mounting brackets Tamper protected Fully supervised Lithium battery ETL listed Model Number: 2GIG-PIR1-345 The GC3 panel features 100 wireless zones, 100 user codes, our patent-pending CellSled(TM) cellular radio that can be installed via a side-panel door. GC3 also has a USB port on top, for updating firmware plus dozens of new features like user bookmarks, ‘rooms’ for fast automation, and one-touch arm/disarm. The kit includes the most popular add-on products homeowners want: A PIR motion detector, 3 compact door-window sensors, and the 4-button Key Ring key fob. Kit Contents: [1] 2GIG-GC3-345 GC3 Panel (English) [3] 2GIG-DW10-345 Door/Window Contact [1] 2GIG-PIR1-345 Passive Infrared Motion Detector [1] 2GIG-KEY2-345 Key Ring Remote Model Number: 2GIG-KIT311-GC3 Once you have DIY installed the 2GIG GC3 system Geoarm recommends that you activate either DIY or PRO Alarm.com interactive monitoring services. This will allow customers to remotely control their security, automation, and cameras from anywhere in the world. 2GIG GC3: http://bit.ly/GC3KIts Contact: http://bit.ly/contactgeoarm Alarm Monitoring: http://bit.ly/geoarmmonitoring Geoarm Security Blog: http://bit.ly/DIYSECURITYBLOG