Truss Nose Rib Testing: Part 5
FINALLY there is some actual load testing of the Truss Style Nose rib of the UWS-4. There was a lot of preparation leading up to this test but it was worth it. Link to the Ultralight Airplane Workshop's books web page, including "Simplified Aircraft Design for Homebuilders"" https://www.ultralightairplaneworksho... Links: Youtube Channel: / @designer103 Patreon: / ultralight_airplane_workshop Discord: / discord Twitter: / designer1032 Facebook: / ultralightairplaneworkshop Website: https://www.UltralightAirplaneWorksho... FAA AC 103-7: https://www.faa.gov/documentLibrary/m... Xflr5 software: OpenVSP: http://openvsp.org/ Music: https://www.bensound.com Disclaimer: If you use any of the information that you see on this video on a project of your own, YOU become the engineer and responsible party for your project. It is possible that miscalculations were made in the production of this video. Since you are now the engineer for your project, you must verify the information that you use.

Main Rib Testing Part 1

Whipple Tree Analysis and Fabrication

The Pressure was On for this Urgent CAT 637 Cylinder Rebuild

Truss Nose Rib Test: Part 4

3 Minute Aluminum Motorcycle Gas Tank Metal Shaping

UWS-4 Main Center Spar Drag: Part 3d, Rivet And Joint Drag

Piper Wing Spars Explained

658kmh 408mph! | When everything just goes right

UWS-4 Struct Design: Ribs Part 1, Ultra Cruiser Ribs

Making Leading Edges

How to build an accordion | SWR Craftsmanship

The Crash Flight of the JU-52, August 2018, in Switzerland

New report reveals deadliest design flaws that doomed the Titan submersible | About That

Unbelievable Smart Worker & Hilarious Fails | Construction Compilation #5 #adamrose #smartworkers

UWS-4 Main Center Spar Drag, Part 3a: Intro

Aluminum Wing Skin/Rib Rivet Load Test

Making GOOD Retracting Casters is HARD

Small Scale Rubber Hydroforming Aluminum Sheet : Part 1, Template and Form

