Dell PowerEdge R710 build PART 2/9 | setting up storage subsystem

This is Part II of a series of videos showing how I build up a used PowerEdge R710 server for use as a FreeNAS or UNRAID server. In Part II, I replace some missing HDD trays and clean up their appearances by removing the old labels. I then remove the old RAID card, SAS cables, and cache battery. In its place, I upgrade it with a H200 IT mode HBA card flashed with LSI IT firmware and the appropriate subsystem ID that allows it to work in the integrated storage slot. I also upgrade the SAS cables with SFF-8087 connectors for the H200. 0:35 - How to remove the labels on Dell HDD trays 5:49 - How to remove the SAS cables 9:05 - How to remove the PERC6/I RAID controller 9:53 - How to install SAS cables for H200 14:52 - How to install H200 in integrated slot 20:07 - Final wrap up To buy pre-flashed H200 with IT mode firmware that will work in all 11th gen Dell server integrated storage slots, find it in my eBay store here: https://ebay.us/B2zzZi To buy the Dell SAS cable set (Dell P/N: P110M, N170M), find it in my eBay store here: https://ebay.us/4ieZUL or for aftermarket SAS cables that also work in R710: https://ebay.us/WhHTdI For many other server items, check out my eBay store: https://ebay.us/U9fa9S eBay Partner Affiliate disclosure: The eBay links in this video description are eBay partner affiliate links. By using these links to shop on eBay, you support my channel, at no additional cost to you. Even if you do not buy from the ART OF SERVER eBay store, any purchases you make on eBay via these links, will help support my channel. Please consider using them for your eBay shopping. Thank you for all your support! :-)