Pole Position PCB Repair - Old, Crusty, Flaky (like us) Graphics issue - RevB Set Part 4
Wrap up this board set with what I think is a permanent fix, only for Pole Position to win the worst board set to repair trophy again. 00:00 Intro/Symptom 00:40 Experimenting https://forums.arcade-museum.com/thre... 03:00 Cold Solder Joints? 05:20 Sockets? 09:45 DIP switch settings 11:30 rom differences 14:15 In the Cabinet 15:00 Play a game
▶︎
Pole Position PCB Repair - Mostly Flaky Bench Interconnect
▶︎
Atari Food Fight Reproduction PCB - Post Assembly Test
▶︎
EEVblog 1752 - Texas Instruments SCREWED UP the NE5532!
▶︎
20 Innovative Tech Products From The 1980's That FAILED Miserably
▶︎
Pole Position PCB Repair - RAM 73 Check z8002
▶︎
What Happened to the World's Largest Tube TV?
▶︎
Nintendo VS. PCB Repair - Testing both sides
▶︎
I Built Retracting Casters that are Actually GOOD
▶︎
I Was Right About AI
▶︎
Electricity Does Not "Split" H₂O. And That's VERY Useful.
▶︎
Unbelievable Workers | Working with Talented Engineers #46 #fail #adamrose #smartworkers
▶︎
the true reason C++ always wins
▶︎
Atari Namco Dig Dug PCB Repair - Boot, Graphics and Resetting
▶︎
Is the ZX81 / Timex Sinclair 1000 actually bad? Let's fix these to find out.
▶︎
Atari Pole Position Pedal Assembly
▶︎
Unbelievable Smart Worker & Hilarious Fails | Construction Compilation #7 #adamrose #smartworkers
▶︎
Commodore’s Weirdest OS Is Back For 2026
▶︎
Pengo PCB Repair - Stuck Control Input
▶︎
x86vsARM difference explained for Beginners
▶︎