SnapMaker Artisan Cutting 10 mm Aluminium with 200w CNC Module

Hi everyone, in this video I'd like to try out the SnapMaker Artisan Premium CNC module to machine and cut a 10mm thick sheet of 6061 aluminum! The part was designed in Fusion 360 (an upgrade for my drill press), and I'll also configure three 2D machining operations in Fusion for pockets and contours, so I can obtain my part by removing material from the stock. I'll cut the aluminum with a three-flute tungsten carbide flat end mill, suitable for metalworking, with a 4mm shaft and a length of 50mm. For the machining operations, I'll use a 0.2mm plunge and a speed of 200mm/min to test whether the machine is capable of such a job (a bit extreme for a hobby CNC like this). The entire process will take about a couple of hours. Here are some helpful links about the materials used: Snapmaker Artisan Premium 3-in-1: https://snapmaker.sjv.io/c/6072615/17... 200W CNC Module: https://snapmaker.sjv.io/DyeoXa Milling Tool & Collet: https://amzn.to/4r8oxUy https://amzn.to/4oJei7j https://it.aliexpress.com/item/100500... Materials used: 6061 aluminum: https://s.click.aliexpress.com/e/_c3h... Support MDF: https://amzn.to/3Xv0C3N Cutting oil: https://amzn.to/3M2HZ4G (But in this case, it's not necessary; in fact, it only makes cleaning the shavings difficult.)