Toilet Seat Manufacturing Process explained, Western Toilet seat making process

Toilet bowls and tanks are made from a special clay called vitreous china. Vitreous china is a mix of several kinds of clay, called ball clay and china clay, silica, and a fluxing agent. Clays are hardened by first drying in air, then being fired (baked) in a very hot oven called a kiln. Usually a shiny, waterproof coating called a glaze is applied only after a first firing, and the clay is fired a second time. Vitreous china is an exception, in that clay and glaze can be fired together. The whole clay body vitrifies, or turns glassy, so the toilet is actually waterproof and stain proof through its entire thickness.As with any industrial process, quality checks are taken at several points in the manufacturing of toilets. The clay is sieved and purified before it is pumped into the factory's tanks. Workers doing the manual finishing of the castings check the pieces for cracks or deformities. After firing, each toilet is tested individually. Random sample checks are not a good enough gauge of quality: each piece must be inspected for cracks. There are several ways to do this. One test is to bounce a hard rubber ball against the piece. It should emit a clear, bell-like ringing sound. A cracked piece will give off a dull sound, indicating a crack that might not have been visually obvious. Call this number to know more ZOYO Bathware 7510 666 999 9745 99 66 33 E mail [email protected] Follow us here: EMAIL : [email protected] WhatsApp : https://wa.me/919020067478 FACEBOOK PAGE :   / villagereallife   INSTAGRAM :   / village_real_life_by_manu