AKAI X 360D Demo. Serviced, Spark Quenchers, Caps Transistors replaced. 1969

*Mechanics Completely dis-assembled, Cleaned, and Re-Lubricated with White Electrical Grade Lithium Grease. *Motors Lubricated with Synthetic Oil. *Capstan Belt Replaced. *Counter Belt Replaced. *Reverse - O - Matic belts Replaced *All Pots AND Switches were Cleaned with De-Oxit D5 Cleaner, then after a 12 hour dry, Lubricated with De-Oxit Fader Lube for Clean and Quiet Operation. *All Capacitors on the Pre-Amp, Playback, and Record boards were replaced. *Fault Prone Transistors on Pre-Amp Board were replaced. *All Spark Quenchers were replaced. *Relays disassembled and contacts cleaned (Not Burnished) Cleaned with De-Oxit, then D100. *MRL Calibration Tape used on this deck and levels were set for Recording and Playback. Specs from HiFi Engine; Track system: auto reverse, 4-track, 2-channel, stereo/monaural system Heads: 1 x record, 1 x playback, 1 x erase, 1 x bias Motor: 2 x reel drive, 1 x capstan Tape speeds: 1 7⁄8 3 3⁄4 7 1⁄2 15 ips Wow and flutter: 0.04% (7 1⁄2 ips) Frequency response: 30Hz to 18kHz (7 1⁄2 ips) Signal to Noise Ratio: 50dB Total harmonic distortion: 1.5% Input: 50mV (line), 5mV (DIN), 0.5mV (mic) Output: 1.23V (line), 0.4V (DIN) Semiconductors: 44 x transistors Dimensions: 444 x 406 x 254mm Weight: 25kg