Rebuilding a CoderDojo Robot | RP2040 Robot Assembly (Part 2)

In Part 1, I tore down one of my CoderDojo Kingston University robots to show what's inside. In this part, I rebuild it from scratch — motor plate, middle plate, top plate, wiring, covers, wheels, and a first power-up test. 📘 My new book, **Learn Robotics Programming (3rd Edition)**, is out now — if you want a step-by-step guide to building and coding your own robot, this is a great place to start: https://www.amazon.com/Learn-Robotics... Watch me put the whole robot back together, sensors and all, and hear a few honest thoughts on what I'd do differently next time round. *Chapters* 0:00 Intro 0:47 Bottom plate: caster, motors & standoffs 6:50 Attaching the Maker Line board 12:31 Middle plate: standoffs & battery box 20:32 Fitting the ultrasonic sensor mount 23:39 Loading the battery 30:30 Routing the motor wires 32:03 Building the top plate 40:05 Mounting the Maker Pi RP2040 board 42:00 Wiring sensors and motors 46:03 Fitting the covers 48:16 Final wiring: battery & last connections 49:47 Attaching the wheels 50:39 First power-up test 51:19 Outro & what's next 🔧 *Build your own* STLs, an assembly guide, and a bill of materials for this robot are in this Google Drive folder: https://drive.google.com/drive/folder... ⬅️ *Watch Part 1* (the teardown):    • Tearing down a Coder Dojo Kingston Univers...   If you'd like more robot builds and MicroPython coding content, subscribe and let me know in the comments what you'd like to see next. As always, go make stuff and be awesome! #CoderDojo #Robotics #RaspberryPiPico