Costruzione dello spessimetro a battimento Stradivariano - Parte prima

⬇️⬇️ (English translation of the Italian text with timestamps) ⬇️⬇️ 00:00 - Punching thickness gauge 00:08 - Freely inspired by the original preserved in the Stradivarian museum of Cremona 00:16 - Use metal parts with thread M6 00:21 - Base piece 36x36x435 mm 00:33 - Movable arm 32x23x520 mm 00:47 - Piece of support for the movable arm 36x25x140 mm 00:54 - Batting piece 36x15x140 mm 01:08 - Insert the metal rest part into the base piece 01:15 - The housing hole must allow the movement of the part, to be able to perfectly align with the punch after assembly 01:32 - Insert the punch, sharpened at very acute angle, in the movable arm 01:37 - The hole and the housing for the nut must be accurate and without clearance 02:08 - Insert the pivot to join the movable arm and the supporting part 02:13 - The hole and the housing must be accurate and without clearance 02:23 - Do not over-tighten the nut and lubricate the parts in contact with paraffin to ensure fluid motion 02:31 - Make a test assembly dry to make sure everything is well aligned 02:41 - Glue first the batting piece 03:22 - Finally glue the support piece attached to the movable arm 04:01 - With a contact adhesive glue a piece of leather on the metal part of support 04:31 - Remove the piece and finish with care, obtaining a support that will not mark the wood of the plates Index of all my videos on violin making: English: https://davidesora.altervista.org/vid... Italiano: https://davidesora.altervista.org/video/ Davide Sora® is a registered trademark Davide Sora® è un marchio registrato #costruzioneviolino #violinmaking