C.E. Johansson Mikrokator 510-4 Comparator with SKF Stand ø165mm

For sale: A used C.E. Johansson Mikrokator 510-4 Comparator with SKF Stand A Johansson Mikrokator is a mechanical comparator used to obtain mechanical magnification of the difference in length as compared to a standard. A twisted thin metal strip holds a pointer, which shows the reading on a scale. Since there is completely no friction involved in the transfer of movement from the strip to the pointer, it is free from backlash. C.E. Johansson Mikrokator: type 510-4 Mikrokator can measure graduations as small as 1µm with operational error no larger than ±1% Zero adjustment on the micrometer dial Construction in the Comparator completely no friction, no backlash and no wear Adjustment of the lower limit of spindle travel by means of the knurled wheel at the contact tip at the bottom of the stem. Robust, the measuring spindle can be subjected to excessive loads without affecting accuracy SKF stand: Clamping surface ø165mm Lever operated contact point Zero adjustment Construction in the stand completely no friction and no backlash, that also means no wear! Possiblity to adjust measurement pressure Possibility to change measurement direction (for inner measurement) Inner and outer measurements