Ремонт электросамоката, Ошибка E3

#Electric scooter repair #Electric scooter #Electric scooter repairError Repair of the Lexgo R9 Lite electric scooter, with Error E3. I did not find information about such an error in his book. But we did not stop here and decided to figure out what the reason was and why there was no charging and why E3 was constantly blinking. Initially, I disassembled the battery compartment. There is also a control unit there. I checked if there was any visual damage, checked if the battery was charging. Everything was in order. On 38V batteries, but the indicator was constantly blinking Error E3. The next step I decided to disassemble and the upper control unit where the indicator itself and the button. Here are the names there were immediately visible traces of water ingress. After cleaning and soldering the pins of the connectors, it turned out that the button was not working well. After replacing the button, everything worked without any other errors. Subscribe to the channel. -    / @РемонтБытовойТехник   00:00 - Start of video. 00:56 - Errors that are described in the passport. 01:59 - Error E3 03:19 - Problem detection. 04:06 - Start after correction. 05:43 - Button check. 07:22 - Button replacement. 08:35 - After assembly. Test drive. Interesting repairs. DIY oven repair -    • Ремонт духовых шкафов своими руками   Fishing boat, DIY return to life. -    • Кораблик для рыбалки , возврат к жизни сво...   timer. how to set the timer. How to repair a timer. -    • таймера. как настроить таймер. Как отремон...   Motion Sensor. Scheme. Sensor connections. -    • Датчик Движения. Схема.  Подключения датчи...   VK Group - https://vk.com/club187426674