Review - How to build a MOD / MIP V2 54MM RACING CLUTCH

The MOD V2 54mm Racing Clutch hits harder faster, its shoe longevity is vastly improved and when shoes and springs do wear out, there’s no need to ditch the entire assembly as it is completely rebuildable (#14353)! If you are a racer, this is a MUST have product for your 1/5th scale. Warning: Must use a vented housing, a closed housing will trap heat and melt the clutch. If possible use a new smooth (no cuts) clutch bell. Bartolone/Vertigo clutch bells recommended. If using a used clutch bell be sure to use emery cloth or fine sand paper to remove old sediments from inside bell (cross hatch pattern) Do not ride the clutch if it is under another car or under unnecessary load. Use with 34cc and below engines in offroad vehicles (drag cars / oval use at own risk) If slipping occurs do not ride the clutch and be sure that all the above is within spec To purchase this product click the link below: MOD Racing https://modspeedshop.com/collections/...