Y&H 2200W/3200W Hybrid Inverter Connection, Setup 01SUb Solar Priority Demonstration Teaching Video

This is a multi-function inverter charger, combining functions of inverter, solar charger, and battery charger to offer uninterruptible power support with portable size.Bulit in 80amp mppt controller, which integrates solar energy storage &means charging energy storage and AC sine wave output.It can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV power supply, security monitoring system, emergency lighting system, field power system, household power system, etc. Now we will demonstrate and explain the operation of this machine for you: 1.How to connect the machine correctly: The first is to connect the battery. Note that the positive and negative poles of the battery cannot be connected with the positive and negative poles of the machine. Connect to AC input. Connect PV input. 2. Turn on the inverter switch, turn on the AC input switch, and turn on the mains, and the LED will change from blinking to steady on. Turn on the PV input switch. Turn on the AC switch. In this way, insert the fan plug into the socket, and you can see that the fan is running normally. 3. Next is to choose settings. Set 01SUb(PV Maximize Power Generation Setup), Setting 16 option, C50, Solar Priority Charging. Setting 12 option, battery low voltage to mains charging, When the battery voltage falls be;ow the set value(11.3V) Setting 13 option, battery high voltage to battery power, When the battery voltage is higher than the set value (13.5V) In this way, the sun is strong at noon, and the solar energy supplies power to the load. Note: The battery must be connected first, otherwise it cannot be started. When the sunlight is weak, the battery will assist the power supply. When the battery voltage is lower than the 11.3V we set, the battery will stop working, and the mains will automatically supply power and charge the battery. When the battery voltage reaches 13.5V, the utility power stops supplying power and switches to battery auxiliary power supply. 4. BMS lithium battery communication If your battery BMS system is PACEEX.05 option set Lib. you can view the lithium battery voltage through the inverter LCD Settings are user-defined to connect a lithium iron phosphate battery Setting 05 option USE 26 Option to set charging cutoff voltage 14.4V 27 Option to set charging cutoff voltage 14.4V 29 Option sets the stop discharge voltage 10.8V 5. Next is the sequence of inverter terminal opening: Close the AC input Close PV input Turn off the AC output Turn off the power of the inverter Finally disconnect the battery If you want to know more about this inverter, you can click the link below to jump to the product page and download the instruction manual of this hybrid inverter Website: https://www.yonghuisolar.com/ 2200W inverter link: https://www.yonghuisolar.com/products... 3200W inverter link: https://www.yonghuisolar.com/products... Facebook:   / yonghuisolar