How To Replace Front Lower Control Arms 2005-15 Nissan Xterra

Shop TRQ on 1AAuto.com Control Arm with Ball Joint Set https://trq.video/ia-1ASFK00576 Control Arm with Ball Joint https://trq.video/ia-1ASLF00351 Control Arm with Ball Joint https://trq.video/ia-1ASLF00352 Shop TRQ on eBay Control Arm with Ball Joint Set https://www.ebay.com/itm/231808581006... Control Arm with Ball Joint https://www.ebay.com/itm/353336551164... Control Arm with Ball Joint https://www.ebay.com/itm/231808580996... Shop TRQ on Amazon Control Arm with Ball Joint Set https://www.amazon.com/dp/B0779GPBSZ/... Control Arm with Ball Joint https://www.amazon.com/dp/B077J8X5JP/... Control Arm with Ball Joint https://www.amazon.com/dp/B077JFRGLX/... Shop TRQ on Walmart Control Arm with Ball Joint Set https://www.walmart.com/ip/TRQYouTube... Control Arm with Ball Joint https://www.walmart.com/ip/TRQYouTube... Control Arm with Ball Joint https://www.walmart.com/ip/TRQYouTube... Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm in your 2005-15 Nissan Xterra. • Check here for more videos on the 2005-2015 Nissan Xterra:    • Nissan Xterra 2005-2015 2nd Generation   This repair was done on a 2005 Nissan Xterra Off-Road 4.0L and the process should be similar on the following vehicles: 2005 Nissan Xterra 2006 Nissan Xterra 2007 Nissan Xterra 2008 Nissan Xterra 2009 Nissan Xterra 2010 Nissan Xterra 2011 Nissan Xterra 2012 Nissan Xterra 2013 Nissan Xterra 2014 Nissan Xterra 2015 Nissan Xterra Tools you will need: • 19mm Wrench • 22mm Wrench • 13mm Socket • 14mm Socket • 17mm Socket • 19mm Socket • 21mm Socket • 32mm Socket https://trq.video/oaz-1AAST00003 • Axle Fork • Brake Caliper Hanger https://trq.video/odd-1AXAA00439 • Trim Tool Set https://trq.video/ov2-1AXXX00006 • Straight Cutters • 3/8 Inch Impact Gun • Air Chisel • Ratchet • Socket Driver • Torque Wrench https://trq.video/oJc-1AXAA00044 • Anti-Seize Grease • Marker / Writing Utensil • Center Punch • Floor Jack • Hammer • Jack Stands • Pick https://trq.video/oos-1AXAA00037 • Reciprocating Saw Subscribe:    / @trq   Check out our playlist: Nissan Xterra 2005-2015 2nd Generation:    • Nissan Xterra 2005-2015 2nd Generation   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.