How to reset your civic SRS light

Just a short one today, the day after cleaning the carpets the civics SRS light appeared. In this video I show you how to reset it on an EK3 civic! It took me multiple attempts to get the timing right. I believe the process is the same for EG, EK, EP civics - and other hondas around the 90's. Instructions below: 1. There is a yellow plug under the dash plugged into the fuse panel. It has two wires going into it. Take that plug out, place a jumper wire (or paperclip) into the two holes to short the wires. 2. Turn the ignition key to the “ON” (II) position. The SRS light will go off. Within 4 seconds unplug the jumper wire. 3. When the SRS light comes back on plug the jumper wire back in within 4 seconds. 4. Once the light goes off again, remove the jumper wire. The light will blink twice and go out. 5. Unplug the jumper and turn the ignition key off, wait 15 -20 seconds and start the car