Skoda Octavia A7 замена прокладок теплообменника -1

#repair #Skoda #OctaviaA7 PART 1 Car: Skoda Octavia A7 1.8 Turbo, gasoline, all-wheel drive (4WD) Engine brand: CJSB Mileage: 182,000 km, 2014 At 159,000 km, the engine was overhauled, and all gaskets were replaced accordingly. There is now engine oil in the expansion tank. We are replacing the heat exchanger gaskets and the heat exchanger itself. 00:14 – Vehicle History 01:13 – Drops of engine oil in the expansion tank (non-original tank, made by FEBI) 02:23 – Removing the air filter housing and air intake 02:58 – Removing the fan diffuser 04:12 – Diffuser mount, how to remove it correctly 05:10 – Removing the intercooler hose 06:17 – Installing the intercooler plug 06:30 – Draining the antifreeze through the lower radiator flange 07:07 – Removing the sensor connector, and then the hose 09:41 – Oil in the reservoir, what will happen if you continue driving 10:50 – Accessing the attachment bracket 12:07 – Partially removing the air conditioning compressor to gain access to the alternator 13:01 – Moving the alternator away to gain access to Heat exchanger 1:27 PM – Remove the connector on the removed generator 1:45 PM – Access to the heat exchanger is now available, we clean the surface and remove the heat exchanger 2:23 PM – All work is done manually without pneumatic tools 3:22 PM – Remove the heat exchanger housing and inspect it 3:52 PM – Replace the disposable tube Join GM-City: VKontakte: https://vk.com/avtoservisgmcity Instagram:   / gmcity.ru   Facebook:   / gmcityauto