1. Czym wypchnąć obornik? 👉 Ładowarka Manitou MLT 420-60 H

Top 10 recommended videos on this channel: 1. My shoe got sucked in 😂 mud up to the axles 👉 Deutz-Fahr 6185 TTV    • Deutz-Fahr 6185 TTV w błocie po osie   2. Meprozet slurry tanker 👉 Available from Agromarket Jaryszki    • Wóz asenizacyjny Meprozet 👉 W ofercie firm...   3. 👉What's the difference between these trailers? They look identical 😁 Manufacturer: EKOPOM    • 👉czym się różnią te przyczepy? na oko iden...   4. Old Ursus C360 renovated and refreshed 👉 Tractor from 1978    • Video   5. Old Ursus C330 👉 after renovation 👉 new cab and hood. Manufacturer: Naglak    • Stary Ursus C330 👉 po remoncie 👉 nowa kabi...   6. 🤓 John Deere 5090 R and Hardi Commander 4500. Farm: 43 hectares    • Hardi Commander 4500. Gospodarstwo 43 hektary   7. Four Deutz-Fahr tractors and 300 hectares to work. And also some services.    • Video   8. Heavy downpour in the field 🤓 Farmer on the DEUTZ-FAHR combine 👍 Harvest 2019    • Video   9. How much do EKOPOM trailers cost? Rich equipment 🤓 Agricultural videos    • Ile kosztują przyczepy EKOPOM? Bogate wypo...   10. EKOPOM 14-ton trailer 🌽 Corn harvesting 👉 Extra from the Minikowo exhibition    • Przyczepa EKOPOM 14-tonowa 🌽 Zbiór kukuryd...   Manitou MLT 420-60 H telehandler. Farm in Lasocice near Leszno in the Greater Poland Voivodeship. Manitou MLT420-60 H telehandler. Thanks to 4 steering modes and a very small turning radius of 3.06 m, the MLT 420 can maneuver in tight spaces, such as the cramped barn on this farm. 👉 The machine is designed specifically for dairy farms, barn work, and cattle feeding. The vehicle has an identical cab ergonomically to the larger MLT 625 model, allowing operators to quickly become accustomed. 👉 MLT 420-60 H - the loader has compact dimensions: its height is 1.97 m and width is 1.49 m. The MLT is equipped with a 4-cylinder Kubota engine with a displacement of 2615 cm3 and an output of 57 HP, compliant with the Stage V emission standard. Maximum torque, measured at 1600 rpm, is 174 Nm. The machine has an interesting design and ergonomically arranged components, particularly for servicing. Access to the engine is easy, hidden on the right side, under an opening hood. Beneath it are two coolers – oil and engine – mounted together. A hydraulically powered reversible fan is mounted on the cooler, allowing for cleaning of the air intakes when working in dusty conditions and with heavy mechanical debris. After opening the cover with the radiator assembly, we gain access to the engine. The manufacturer has located necessary components and parts replaced during maintenance near the service opening. The loader has a telescopic boom that reaches a height of 4.35 m, and the maximum load capacity is 2 t. The machine is equipped with a hydrostatic drive, a two-speed gearbox, and a gear pump with a flow rate of 77 l/min and an operating pressure of up to 235 bar. The loader's maximum speed is 25 km/h.