PIERWSZY NA ŚWIECIE Dromader 1/48 IBG – Pełna Budowa [4K]

✈️ Welcome to the world's first Build Review of the PZL M18 Dromader in 1/48 scale from Polish manufacturer IBG Models! In this episode, I'll guide you through a full test build of one of the most anticipated models in Polish aviation – the legendary agricultural and firefighting aircraft manufactured by PZL Mielec. The Dromader is a true giant among agricultural and firefighting aircraft. Compared to the Cmelak, popular among modelers, it is larger, heavier, and truly impressive, and – most importantly – it's in 1/48 scale. In the video, I walk you through the step-by-step construction of this model, examining how IBG Models managed to replicate this extraordinary aircraft. ☕ If you want to watch more unboxings, build reviews, and test builds of new modeling products, support the channel and buy me a coffee: 💬 You can also join the MrTrumpeter community and support the channel regularly: https://patronite.pl/mrtrumpeter What do we test in this episode? ✅ Fit of components – locating pins and how to connect the main parts of the model. ✅ Bonding of the kit and the resin accessories released for it. ✅ We'll discuss the construction points that require special attention to avoid mistakes. ✅ ASz-62 engine – the characteristic radial engine of the Dromader, which is almost completely exposed in this aircraft. ✅ 3D printed accessories – propeller, wheels with tire deflection, sprinkler flap, and the complete engine with exhaust system. ✅ Hataka Masks and Paints – dedicated paint sets in the Orange Line, Red Line, and Blue Line series. Film Chapters 0:00 – The world's first test build of the PZL M18 Dromader 2:03 – Complete cockpit construction + cooling fan protip 6:24 – Fuselage and detail assembly – important gluing sequence! 13:25 – Control surfaces - protips 16:21 – ASz-62 engine and propeller from the IBG kit 17:42 – 3D-printed ASz-62 resin engine 19:07 – 3D-printed propeller 21:23 – Engine and propeller comparison - 3D print vs. kit 22:57 – Landing gear wheels - 3D print vs. Kit 23:32 – Model build variants - you won't find this in the manual 24:47 – Possibility of using a fire hatch - 3D print 25:35 – Wings assembly options 28:53 – Final touches 31:21 – Summary of the Dromader model build Question for viewers 👉 If you were building this Dromader, would you go all out with resin, or are the IBG plastic details good enough for you? Let us know! 🔔 Subscribe so you don't miss future episodes and the full step-by-step build of this model! #PZLM18 #Dromader #IBGModels #scalemodel #scalemodels #plamo