Landing a Taildragger, Wheel Landing Vs Three Point Landing. Which is best and Why.
Alright, a little background on the difference between the two Landings. Wheel Landing: The wheel landing, also known as a 'two-point' landing, involves gently touching down on the main wheels while keeping the tailwheel off the ground. Think of it as "flying the airplane onto the runway." The key to a successful wheel landing is to smoothly bring the mains in contact with the runway while simultaneously releasing back pressure and pushing the stick forward to attain a negative angle of attack on the wing. The main risk associated with a wheel landing arises during the rollout when the tailwheel remains off the ground, and the effectiveness of the rudder decreases due to reduced airflow over it. It's crucial to recognize this "rudder fade" and get the tailwheel down for proper steering. Once the tailwheel is down, keep the stick all the way back until the plane comes to a complete stop. Some pilots prefer power-on wheel landings, while others favor power-off landings, a choice often based on personal preference and airplane type. The advantage of a wheel landing is that it's easier to spot-land , and you have more flight control authority due to the higher speed at touchdown. This technique is often preferred in strong crosswinds. Now, let's talk about a landing technique that requires a bit more finesse: The Three-Point Landing (also known as "Full Stall Landing"). In this technique, the pilot aims to touch down simultaneously on all three wheels – the main wheels and the tailwheel – at the slowest possible speed while keeping the stick all the way back. Alternatively, you can fully stall the airplane just above the runway, and it gently settles down in the three-point attitude. What's great about the three-point landing is that the airplane is essentially done flying; it's slow, and the tailwheel is down, providing precise steering control with no ambiguity. However, one of the disadvantages of three-point landings is that they can be a bit more challenging to spot land because when the airplane stops flying, it stops flying and that's where it comes down. Additionally, in gusty conditions, you're more susceptible to being affected by the wind because you have less flight control authority. As Always, it's good to practice both!! 0:00 Intro 0:40 From Behind View of Each Type 1:33 Three Point Landings. 5:25 Wheel Landings 8:03 Side by Side Comparison 8:32 Crosswind Landings

What Happened to Basic Stick & Rudder Flying? Slipping an Airplane to Slow down.

Tailwheels and Crosswind - Part I

June 5, 2026

Wheel Vs 3point landings Debrief.

65HP J3 Cub , just how bad is the Performance of this Classic Taildragger? It might Surprise you.

STOP Wrecking Airplanes and Ground Loop This Instead!

German Pilot Tested A Captured Spitfire... His Words Shocked The Luftwaffe

Are Piston Engines Dead? Small Turboprops are Here

ROOKIE landing mistake! Tailwheel Training: Part 3

How Long Does It Take To Get Your TailWheel Endorsement? Part 1

6 Landing Tips You DON'T Know (They Actually Work)

How to Fly a Tailwheel Airplane

737 vs A320: After Flying Both, One Clear Winner

MAKE PATTERNS SMALL AGAIN!!

Fly-off: Best classic tailwheel aircraft

Why “Step on the Ball” Isn’t Enough (Real Coordination Explained)

Stick & Rudder : The Book That Will Save Your Life as a Pilot

Learning to fly a tail-dragger aeroplane - The Flying Reporter

Five Rules of Taildragging

